Protect your TOYOTA PRADO 150 / 120 SERIES Common Rail diesel from the most damaging fuel contaminant - WATER!


Part Number: SCANTOY-2

This kit comes complete with 1 x UNIVERSAL Waterscan Unit (WATERSCAN10) 1 x Toyota PRADO Fitting KIT (PRADO150FIT) 1 x Mounting Bracket (TOYSCAN-2)

This waterscan unit mounts pre fuel filter to monitor possible water/sediments in fuel, before it gets to the injector pump. Video Icon


Dual Flow - M14 x 1.5mm thread in/out - Probe detects contaminates (water) by testing the conductivity of the fuel.

Our Water Scan kit contains a probe to detect water by testing the conductivity of the fuel. A light (usually mounted on the dash) is included to alert the driver if water is detected in the fuel during ignition and/or while driving.

Some Waterscan information:

Water is one of the most prevelant and damaging contaminants within a common rail fuel system and will cause premature wear to the fuel injection system and fuel pump. Higher pressure systems such as common rail vehicles are more reliant on good fuel quality and have a high failure rate when water contamination is present.

An electronic probe detects any water present by testing the conductivity of the fuel and will alert the driver via a light or buzzer on the dash. The waterscan will collect the water in a water collection bowl, if water is detected you should stop driving immediately, drain it off and have your tanks drained.

Even a small amount of water can be destructive to your fuel system resulting in very expensive repairsCLICK HERE FOR OUR PRINTABLE BROCHURE 


10 MM UNIVERSAL Waterscan Unit (WATERSCAN10)Toyota PRADO Fitting KIT (PRADO150FIT) Mounting Bracket suit Toyota Prado 150 /120 series  (TOYSCAN-2)FITTING INSTRUCTIONS

Waterscan Installation Instructions  

  • WEIGHT4.0 kg
  • STOCKIn Stock

Available Options

or make 4 interest-free payments of $82.96 AUD fortnightly with More info