Protect your Mitsubishi Common Rail diesel from the most damaging fuel contaminant - WATER!
WATERSCAN INFORMATIONPart Number: SCANMITS-1
This kit comes complete with 1 x Waterscan Unit (WATERSCAN12) 1 x Mitsubishi Fitting Kit (MITSFIT-1)1 x Mounting Bracket (MITSCAN-1)
Dual Flow - M14 x 1.5mm thread in/out - Probe detects contaminates (water) by testing the conductivity of the fuel.
Some Waterscan information:
Water is one of the most prevelant and damaging contaminants within a common rail fuel system and will cause premature wear to the fuel injection system and fuel pump. Higher pressure systems such as common rail vehicles are more reliant on good fuel quality and have a high failure rate when water contamination is present.
An electronic probe detects any water present by testing the conductivity of the fuel and will alert the driver via a light or buzzer on the dash.The waterscan will collect the water in a water collection bowl, if water is detected you should stop driving immediately, drain and have your tanks drained.
Even a small amount of water can be destructive to your fuel system resulting in very expensive repairs
Our Water Scan kit contains a probe to detect water by testing the conductivity of the fuel. A light (usually mounted on the dash) is included to alert the driver if water is detected in the fuel during ignition and/or while driving.
- WEIGHT3.5 kg
- STOCKIn Stock
or make 4 interest-free payments of $80.91 AUD fortnightly with More info
Have a question?
Not showing in stock? Our supply options don’t end here:
Give us a call on 1300 305 309 to chat about options.